Marca DIVE RITE

Deluxe Harness

Dive Rite Deluxe Harness. A webbing harness designed for hard backplates that provides comfort and streamlining.

Swivel points on the shoulder straps ensure a comfortable fit, which is especially important for women and, also, men with broad shoulders.

A chest strap keeps the harness in place. MIL-SPEC polypropylene webbing provides strength, yet is soft and wont dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his body stature.

Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver.

Tubular webbing sleeves are included for all points where webbing will come into contact with the backplate to prevent abrasion.

Includes marine-grade stainless steel hardware.

Made in the U.S.A.

* Eleven feet of two-inch (50mm) polypropylene webbing rated at 2,900 lbs breaking strength.

* Marine Grade 316 stainless steel hardware is used throughout including: (2) bent D-ring and on each shoulder strap, (2) waist D-rings, and a stainless steel belt buckle.

* 1lb 8oz (0.70kg)

MÁS INFORMACIÓN   COMPRAR  

Selecciona tipo de producto Bolsas Botas y calcetines Botellas Boyas Boyas elevadoras Cajas impermeables Capuchas Cinturones Cuchillos Guantes Libros Pesos Regalos Varios Alas -> accesorios Alas Alas -> arneses Alas -> placas Aletas Aletas -> recambios Aletas -> snorkeling Foto - video -> analogico Foto - video -> digital Fusiles -> accesorios Fusiles Iluminacion -> accesorios Iluminacion -> focos y linternas Instrumentos -> consolas Instrumentos -> instrum. sueltos Instrumentos -> ordenadores Jackets -> accesorios Jackets Mascaras -> accesorios Mascaras -> lentes graduadas Mascaras Mascaras -> recambios Natacion -> accesorios Natacion -> aletas Natacion -> bolsas Natacion -> calzado Natacion -> entrenamiento Natacion -> escarpines Natacion -> gafas Natacion -> gorros Natacion -> ropa Natacion -> toallas Packs Reguladores -> accesorios Reguladores -> octopus Reguladores -> recambios Reguladores Relojes -> buceo Relojes -> mundo marino Ropa -> camisetas Ropa -> chaquetas Ropa -> gorras Ropa -> jerseys Ropa -> pantalones Ropa -> toallas Trajes -> apnea Trajes -> invierno Trajes -> limpieza Trajes -> reparacion Trajes -> secos Trajes -> tropical Trajes -> verano Tubos -> accesorios Tubos Selecciona marca 4WATER AKONA APEKS AQUALUNG AQUASPHERE ATOMIC BARBOLIGHT BARE BCNSCUBA BEST DIVERS BEST HUNTER BEUCHAT CAMARO CITIZEN CRESSI DAKINI BOOKS DELTA P DIVE RITE EUROPALMUS GREEN FORCE H.DESSAULT IKELITE IMERSION INTOVA KOWALSKI LAGRESA MARES MCNETT MOVINMARINE OCEANERS OMER ONE OSRAM PICASSO POSEIDON RALF TECH RISCK SCUBAPRO SCUBASTORE PACKS SEA AND SEA SEACSUB SEACURE SEALIFE SEEMANN SHEARWATER SNAPSIGHT SPARE AIR SPECIAL COMMUNICATIONS SPETTON SPORASUB SUUNTO TECH SIDE TECNOMAR TEK-TITE UNDERWATERGUIDE UWATEC

Transplate

Marca DIVE RITE

Dive Rite Transplate. Transplate

A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate. Designed like a mountaineers backpack, the Transplate harness disperses weight across the hips and back, minimizing shoulder strain.

When used with a 6-pound steel backplate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories. Available in sizes M to XXL. Made in the U.S.A.

Please note: Stainless steel and/or aluminum backplate, and cam straps are sold separately.

# Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance. Two-inch (50mm) nylon webbing rated at 7,000 lbs breaking strength forms the shoulder straps and waist strap.

# Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted. Note: Size Medium has only one 2-inch D-ring per shoulder strap due to space limitations.

# Marine Grade 316 stainless steel hardware is used throughout including: (6) 1-inch D-rings, (2) bent D-rings on each shoulder strap and (2) waist D-rings, pivot rings, belt buckle, cam strap buckles, and side plates.

# Shoulder straps feature pivot rings at chest level for comfort, fit, and load distribution.

# Acetyl resin engineered plastic quick release buckles on shoulders for easy doff and don.

# One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin 1-inch quick release buckle are used for a chest strap.

# Marine grade stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance.

# Med: 2lbs 7oz (1.10kg), Lg:2 lbs 8 oz (1.16kg), XL:2 lbs 9 oz (1.16kg), XXL:3 lbs (1.36kg)

# Made in U.S.A.

When diving the Transplate a single tank adapter is not required, however some divers prefer for added weight or stability.

MÁS INFORMACIÓN   COMPRAR  

Transplate

Marca DIVE RITE

Dive Rite Transplate. Transplate

A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate. Designed like a mountaineers backpack, the Transplate harness disperses weight across the hips and back, minimizing shoulder strain.

When used with a 6-pound steel backplate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories. Available in sizes M to XXL. Made in the U.S.A.

Please note: Stainless steel and/or aluminum backplate, and cam straps are sold separately.

# Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance. Two-inch (50mm) nylon webbing rated at 7,000 lbs breaking strength forms the shoulder straps and waist strap.

# Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted. Note: Size Medium has only one 2-inch D-ring per shoulder strap due to space limitations.

# Marine Grade 316 stainless steel hardware is used throughout including: (6) 1-inch D-rings, (2) bent D-rings on each shoulder strap and (2) waist D-rings, pivot rings, belt buckle, cam strap buckles, and side plates.

# Shoulder straps feature pivot rings at chest level for comfort, fit, and load distribution.

# Acetyl resin engineered plastic quick release buckles on shoulders for easy doff and don.

# One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin 1-inch quick release buckle are used for a chest strap.

# Marine grade stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance.

# Med: 2lbs 7oz (1.10kg), Lg:2 lbs 8 oz (1.16kg), XL:2 lbs 9 oz (1.16kg), XXL:3 lbs (1.36kg)

# Made in U.S.A.

When diving the Transplate a single tank adapter is not required, however some divers prefer for added weight or stability.

MÁS INFORMACIÓN   COMPRAR  

Transplate

Marca DIVE RITE

Dive Rite Transplate. Transplate

A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate. Designed like a mountaineers backpack, the Transplate harness disperses weight across the hips and back, minimizing shoulder strain.

When used with a 6-pound steel backplate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories. Available in sizes M to XXL. Made in the U.S.A.

Please note: Stainless steel and/or aluminum backplate, and cam straps are sold separately.

# Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance. Two-inch (50mm) nylon webbing rated at 7,000 lbs breaking strength forms the shoulder straps and waist strap.

# Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted. Note: Size Medium has only one 2-inch D-ring per shoulder strap due to space limitations.

# Marine Grade 316 stainless steel hardware is used throughout including: (6) 1-inch D-rings, (2) bent D-rings on each shoulder strap and (2) waist D-rings, pivot rings, belt buckle, cam strap buckles, and side plates.

# Shoulder straps feature pivot rings at chest level for comfort, fit, and load distribution.

# Acetyl resin engineered plastic quick release buckles on shoulders for easy doff and don.

# One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin 1-inch quick release buckle are used for a chest strap.

# Marine grade stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance.

# Med: 2lbs 7oz (1.10kg), Lg:2 lbs 8 oz (1.16kg), XL:2 lbs 9 oz (1.16kg), XXL:3 lbs (1.36kg)

# Made in U.S.A.

When diving the Transplate a single tank adapter is not required, however some divers prefer for added weight or stability.

MÁS INFORMACIÓN   COMPRAR  

Transplate

Marca DIVE RITE

Dive Rite Transplate. Transplate

A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate. Designed like a mountaineers backpack, the Transplate harness disperses weight across the hips and back, minimizing shoulder strain.

When used with a 6-pound steel backplate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories. Available in sizes M to XXL. Made in the U.S.A.

Please note: Stainless steel and/or aluminum backplate, and cam straps are sold separately.

# Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance. Two-inch (50mm) nylon webbing rated at 7,000 lbs breaking strength forms the shoulder straps and waist strap.

# Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted. Note: Size Medium has only one 2-inch D-ring per shoulder strap due to space limitations.

# Marine Grade 316 stainless steel hardware is used throughout including: (6) 1-inch D-rings, (2) bent D-rings on each shoulder strap and (2) waist D-rings, pivot rings, belt buckle, cam strap buckles, and side plates.

# Shoulder straps feature pivot rings at chest level for comfort, fit, and load distribution.

# Acetyl resin engineered plastic quick release buckles on shoulders for easy doff and don.

# One-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin 1-inch quick release buckle are used for a chest strap.

# Marine grade stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance.

# Med: 2lbs 7oz (1.10kg), Lg:2 lbs 8 oz (1.16kg), XL:2 lbs 9 oz (1.16kg), XXL:3 lbs (1.36kg)

# Made in U.S.A.

When diving the Transplate a single tank adapter is not required, however some divers prefer for added weight or stability.

MÁS INFORMACIÓN   COMPRAR